If you own multiple devices at home, using several remote controls can be inconvenient. Fortunately, you can use a universal remote control to program and control multiple devices with a single remote. In this article, we will guide you through the process of programming your Westinghouse universal remote control.
Programming Your Westinghouse Universal Remote Control
Before you start programming your universal remote control, make sure to take note of the codes that correspond to your device’s brand. Here are the steps to program your Westinghouse universal remote control:
Turn on the device you want to program and check the batteries of your remote control to avoid interruptions during the process.
- Aim your remote control at the device and make sure it’s facing it so it can perform the commands during the process.
- Find the TV button on your remote control and press the SETUP button to enter the learning mode, which prepares the remote control and the programming device.
- Enter the code from the list provided and make sure to enter it correctly to avoid errors during the process.
- If you have entered the code correctly, the tiny light on your remote control will blink four times. Pick any of the codes above the device and enter it.
- The button light will turn off once you start with the code. Aim your remote control towards the television, press and hold the power button, and release it if the device shuts off.
- When your device turns off, it’s an indication that the programming process was successful, and the code has been stored.
- Once the TV is turned on, test the buttons to confirm if it responds to its respective commands. If some of the buttons don’t work, you’ll need to repeat all the steps and use another code.
Using Westinghouse Universal Remote Codes
Here are the universal remote codes you can use to control your Westinghouse devices:
All-in-One Westinghouse Universal Remote Codes:
• 0916
• 0027
• 0912
• 0478
• 0002
• 3241
Three-Digit Universal Remote Codes for Westinghouse TV:
• 003
• 795
• 797
• 500
• 697
• 553
• 808
• 551
• 574
• 652
• 531
• 516
• 072
• 107
• 513
• 575
• 097
• 794
• 856
• 798
• 809
Using a Code Search
If you cannot find the valid key code right away, you can use the code search function of your universal remote control. Here’s how:
Make sure the appliance is turned on first.
Press and hold the configuration button for a few moments.
Simultaneously press the channel up and down buttons and the power button to turn off your television.
Release all buttons, and the tiny light will blink twice, indicating that your remote control has entered search mode.
Press the power button repeatedly until your device turns off.
Once your device turns off, press the OK button to store the code.
Conclusion
Programming your Westinghouse universal remote control can be a bit challenging, but following these steps should make the process easier. Take note of the codes that correspond to your device’s brand, and make sure to enter them correctly to avoid errors during the process. Using a universal remote control can be a convenient way to control multiple devices at home, making your entertainment experience hassle-free.